The CLG-W12 is a passive subwoofer. Optimised for discreet sub-surface installation, its proprietary Monitor Audio bandpass design incorporates an internally loaded 12" C-CAM driver, which sits in a waterproof rotationally moulded polymer enclosure buried below the garden surface—only the CLG-W12’s domed output port is visible.
Features at a glance:
- 12" C-CAM driver
- Fully waterproof
- Extended response down to 30 Hz
- Long throw 12" sub-woofer driver
- 70/100 V and 4 ohm tap
- Robust-moulded cabinet
- Certified to IP54
- Various outdoor applications
Bringing indoor high-fidelity audio outside
From this little ‘chimney’ powerfully taut bass frequencies will join the clean mids and highs of the surrounding CLG140/CLG160 satellites for punchy and articulate full-range garden sound.
The CLG-W12 can be powered from a single amplifier channel at 4 ohms, with its 70/100 V line option recommended for cable runs over 10m (30ft) and for adding subwoofers to the system. In this line configuration, the CLG140/CLG160 satellites are daisy-chained to the CLG-W12, one after the other, up to a recommended maximum of twelve per subwoofer. System expansion to larger garden spaces simply involves the addition of amplifier channels, subwoofers and satellites.
In the simplest designs, satellites are connected in a mono configuration to one amplifier channel, the other channel powering the subwoofer. The use of a stereo power amplifier with 70/100-volt line capability and crossover features will allow the adjustment of levels between bass and mid-high range. Alternatively, the system can be designed to provide stereo operation by adding elements to create left/right zones.
When installed, the Climate Garden System delivers a smooth, wide-open, and controlled frequency response from 30 Hz to 30 kHz in the targeted environment: better than many home audio systems! For patio or deck applications, the CLG-W12 will install within a planter box to enhance Monitor Audio’s CL Series all-weather cabinet speakers with deep bass frequencies, giving custom installers additional design options.
Specification:
- Frequency Response (-6 dB): 30 Hz — 100 Hz
- Sensitivity (1W@1M): 87 dB
- Nominal Impedance: 4 ohms or 70/100 Volt line level (cable select)
- Maximum SPL: 110 dBA
- Power Handling (RMS): 250 W
- Recommended Amplifier Requirements: 100 — 250 W
- Drive Unit Complement: 1 x 12" C-CAM cone, long throw sub-bass driver
- Crossover Recommendation: 100 Hz at a minimum of 12 dB/Octave (24 dB/Octave optimum)
- External Dimensions (H x W x D): 750 x 380 x 505.5 mm (19 1/2 x 14 15/16 x 19 7/8")
- Connection: Encapsulated cable connection
- Environmental Protection Rating: IP54
- Colour / Finish: Brown
- Weight: 19.5 kg (42 lb 14 oz)
- Sold As: Single Unit
- Warranty: 5 years
