The W12 is the mid-sized model within the Anthra subwoofer series. It features a 12” (30 cm) Rigid Surface Technology II (RST II) C-CAM high-excursion driver powered by a Class-D 1,700 Watt amplifier, housed within a comprehensively internally braced, sealed-box cabinet.
Features at a glance:
- 12” Rigid Surface Technology II
- C-CAM high-excursion driver
- Class-D 1700 Watt amplifier
- Full-colour LCD display
- RCA outputs
- Massive motor assembles
- Compatible with MaestroUnite
- XLR inputs
- XLR outputs
- MaestroUnite Setup
Deep, Controlled Bass. Simply.
Engineered to deliver impressive bass in medium and large spaces, the Anthra W12 subwoofer features a formidable 1,700 Watt Class-D amplifier driving a 12” (30 cm) Rigid Surface Technology II (RST II) C-CAM high-excursion driver. The W12 can be used on its own or linked with up to three other Anthra subwoofers for a truly immersive, ultra-dynamic listening experience.
A full-colour LCD display and rotatory dial are located on the back panel to allow for basic subwoofer setup and EQ preset selection, while advanced features including DSP configuration and multi-sub connectivity setup are available via the MaestroUnite app.
Specification:
- System Format: Active - Sealed Cabinet
- Drive Unit Complement: 1x 12" (305 mm) High Linear-Excusion Triple Suspension Driver
- Amplifier Classification: High-Efficiency Class-D
- Lower Frequency Limit: -6dB @16Hz
- Upper Frequency Limit: (LPF Off) -6dB @400Hz
- Driver Excursion (pk-pk): 50 mm
- DSP: 28 Bit 50 MIPS Configuratable through MaestroUnite
- Analogue Digital Conversion: Autoranging Input which combines a 10Vrms maximum input with low signal to noise for small signals
- Amplifier Output Power, 240Vac:
- Instantaneous: 1700 W (Maximum RMS output for an instantaneous signal)
- Continuous short-term: 900 W (Sinewave for 10 seconds)
- Amplifier Output Power, 120Vac:
- Instantaneous: 1325 W
- Continuous short-term: 700 W
- LED UI Control: Brightness, On-Off
- Phase Control: 0-360 Degrees measured at LPF Crossover
- Low Pass Filter: 20-200Hz LPF with Roll off Adjustable from -3 to -48dB/Oct
- Custom EQ: Configurable through MaestroUnite;3 pre-defined EQ curves plus 3 custom EQ curves each with 8 band custom EQ supporting (Peaking, High Shelf, Low Shelf, High Pass)
- Volume Level: Wide adjustable input gain to allow maximum output from a wide range of input signals
- Inputs: Stereo Unbalanced RCA (or mono/LFE using only connector marked LFE)Mono/LFE Balanced XLR
- Outputs:
- Stereo unbalanced outputs with unbuffered throughput from RCA Inputs
- Mono/LFE Balanced XLR outputs with unbuffered throughput from XLR Input
- Mains Input Voltage: Universal Mains, 85-265VAC
- External Dimensions (without feet) (HxWxD): 374 x 374 x 374 mm
- Power Consumption: 200 W
- Cabinet Construction: Braced 25 mm thick MDF with 36mm front baffle
- Grille: Cloth covered magnetically attached Grilles
- Weight: 28.56 kg (63 lb 1 oz)
- Warranty: 5 years
