This medium-sized Tier 2 in-wall loudspeaker is a three-way model featuring two RST II bass drivers, an RST II mid-range driver, and a C-CAM tweeter. Its fully sealed back box delivers consistency of performance, no matter where it is used. It has a cut-out dimension of 527 x 198 mm and a revolutionary Quik-Link speaker cable connector and Tri-Grip II for quick, simple, reliable, and strong installation and fitting.
Features at a glance:
- Ideal for installations where pristine acoustic performance is required
- Filled back box
- Three-way design
- 1 x 1" C-CAM tweeter with UD Waveguide II for lifelike sound
- 1 x 3" RST II mid-range driver
- 2 x 5" RST II bass drivers
- Quik-Link speaker cable connector for quicker installation
- Tri-Grip II for easy and secure fitment
British High-Fidelity Architectural Sound Redefined
This medium-sized Tier 2 in-wall loudspeaker is designed to deliver pristine, engaging acoustics where high-performance sound is a key requirement. It is a three-way model featuring two RST II bass drivers, an RST II mid-range driver, and a C-CAM tweeter. This combination of clear and lifelike high-fidelity sound is of the quality you’d expect from any Monitor Audio passive box loudspeaker.
As a Controlled Performance (CP) model, it is fitted with a fully sealed back box that provides an ideal air load for the drivers, optimising mid-range and bass performance while maintaining sonic consistency regardless of interior wall construction. These rigid, mineral-filled enclosures reduce the sound from the back of the cabinet by around 30 dB. This range guarantees excellent audio quality and versatility for a superior level of sound isolation between rooms and floors.
It has a cutout dimension of 527 x 198 mm and uses the Quik-Link speaker cable connector, which revolutionises the ease and speed of speaker installation. Tri-Grip has also evolved for simple, reliable, and strong fitment.
Specification:
- System Format: 3–Way
- Channels: 1
- Frequency Response, Installed (-6dB): 60 Hz – 35 kHz
- Nominal Impedance: 6 ohm
- Minimum Impedance (20Hz to 20kHz): 4.8 Ohm @ 1 kHz (4.3 Ohm @ 15 kHz)
- Sensitivity (2.83Vrms@1m, Installed): 87 dB
- Maximum Peak SPL* (single speaker @ 1m Z-Weighted): 118 dB
- Continuous Power Handling (RMS into Nominal Impedance, Pink Noise with 6dB Crest Factor): 100 W
- Recommended Amplifier Power (RMS into 8 OHM, Music Signal): 40 – 150 W
- Drive Unit Complement:
- 2 x 5" (127 mm) RST II bass driver
- 1 x 3" (76 mm) RST II mid-range driver
- 1 x 1" (25 mm) C-CAM tweeter
- Crossover Frequency:
- LF/HF: 550 kHz
- MF/HF: 3 kHz
- Bass Alignment: Sealed
- Mounting Depth: 97 mm (3 13/16")
- Cutout L x W: 527 x 198 mm (20 3/4 x 7 13/16")
- External Dimensions (Including Grille (H x W x D)): 560 x 231 x 102 mm (22 1/16 x 9 1/8 x 4 1/64")
- Weight (each): 4.4 kg (9 lb 11 oz)
- Pre-Construction Bracket: WM-B
- Cabinet Finish: Matte Black & Orange & Bronze
- Sold As: Single Unit
- Corner Switch: On/Off
- HF Switch: - /0/ +
- Warranty: Lifetime
