The Platinum In-Wall 3G is a three-way architectural In-Wall loudspeaker that features an MPD III tweeter, 4” RDT III midrange driver and twin 6" RDT III bass drivers. It can be used either horizontally or vertically anywhere within a high-performance home theatre or two-channel stereo system.
Features at a glance:
- 1 x MPD III high-frequency transducer
- 1 x 4” RDT III mid-bass driver
- 2 x 6” RDT III bass drivers
- Dynamic Coupling Filter
- Bespoke speaker terminals and footings
- Underhung, edge-wound voice coils
- Rigid cabinet MDF construction
Objects of Desire.
Platinum In-Wall 3G is Monitor Audio’s flagship high-performance, architectural, in-wall speaker. It is designed for use in high-end audio and movie systems, where accurate, clear and lifelike sound is required. With the minimum of room intrusion but with maximum scale and sonic impact.
Platinum In-Wall 3G can be installed either vertically or horizontally, which means it can be used on any channel within a system and is ideal for LCR applications and for seamless tonal accuracy within a theatre system.
Specification:
- System Format: 3-Way
- Frequency Response, Free-Field (-6dB): 41 Hz – >60 kHz
- Frequency Response, In-Room (-6dB): 27 Hz – >60 kHz
- Sensitivity (2.83 Vrms @ 1m, Free-Field): 88 dB
- Nominal Impedance: 4 Ohms
- Minimum Impedance: 4.1 Ohms @ 1.6 kHz
- Continuous Power Handling (RMS into 4 Ohms, Pink Noise with 6dB Crest Factor): 300 W
- Recommended Amplifier Power (RMS into 4 Ohm, Music Signal): 150 – 600 W
- Bass Alignment: Sealed
- Port Tuning Frequency: N/A
- Crossover Frequency:
- LF/MF: 825 Hz
- MF/HF: 3 kHz
- Drive Unit Complement:
- 2 x 6” RDT III bass driver,
- 1 x 4” RDT III mid-range driver,
- 1 x MPD III tweeter
- External Dimensions (Including Grille and Terminals (H x W x D)): 1207 x 332 x 105.5 mm (47 9/16 x 13 1/16 x 4 4/16”)
- Cut-Out Dimensions: 1175 x 300 x 97.5 mm (46 1/4 x 11 13/16 x 3 13/16“)
- Weight (each): 27.7 kg (61 lb)
- Warranty: Lifetime
