Description

The Platinum 200 3G is a slim and compact three-way floorstander, designed to deliver a rich, dynamic high-end performance with tight, controlled bass. It boasts an MPD III transducer, a 4” RDT III mid-range driver, and twin 6” RDT III bass drivers.

Features at a glance:

MPD III transducer
4” RDT III mid-range driver
Slim and compact three-way loudspeaker
Exceptionally large soundstage
Rear-ported
Embellished with etched inlays
Available in Piano Black, Piano Ebony and Pure Satin White

Objects of Desire.

Capable of delivering levels of bass extension and detail normally only found in the largest of floorstanding loudspeakers, the Platinum 200 3G is capable of providing an exceptionally large soundstage from a relatively diminutive form. The new MPD III transducer and RDT III mid-range and bass driver cones have refined the overall balance of the speaker and reduced distortion, while also allowing it to deliver an exceptional room-filling performance. It also benefits from a new cast outrigger and crossover-mounted plinth assembly.

Specification:

System Format: 3-Way
Frequency Response, Free-Field (-6dB): 32 Hz – 60 kHz
Frequency Response, In-Room (-6dB): 23 Hz – 60 kHz
Sensitivity (2.83 Vrms @ 1m, Free-Field): 88 dB
Nominal Impedance: 4 Ohms
Minimum Impedance (20 Hz to 20 kHz): 4.0 Ohms @ 2.5 kHz
Continuous Power Handling (RMS into 4 Ohms, Pink Noise with 6dB Crest Factor): 300 W
Recommended Amplifier Power (RMS into 4 Ohm, Music Signal): 150 – 600 W
Bass Alignment: Ported
Port Tuning Frequency: 38 Hz
Crossover Frequency:
- LF/MF: 825 Hz
- MF/HF: 3 kHz
Drive Unit Complement:
- 2 x 6" RDT III bass driver,
- 1 x 4" RDT III mid-range driver,
- 1 x MPD III tweeter
External Dimensions including Trims, Terminals & Outrigger Feet & Spikes (H x W x D): 1041.6 x 368.7 x 454.9 mm (41 x 14.5 x 17.8")
External Dimensions including Trims, Terminals & Outrigger Feet without spikes (H x W x D): 1025 x 368.7 x 454.9 mm (40.3 x 14.5 x 17.8")
Weight (each): 35.8 kg (78 lb 14 oz)
Warranty: 5 years