Like the rest of the Cinergy range, the 200 incorporates some very smart features to achieve its effortless performance.
Features at a glance:
- Unique isolation options
- Rotatable mid-tweeter array
- Removable port bungs
- Suited to custom-built mounting behind an acoustically transparent screen
- 1 x MPD Transducer
- 2 x 8" RDT Driver
- 2 x 2.5" C-CAM Driver
- Magnetic grilles
- THX Certified
True cinema sound at home
On the outside, handy brackets make installation easy. Inside, two mid-range drivers double the power handling, improve efficiency, and reduce reflections off ceilings and floors. Together, they ensure everything from the most epic cinematic score to the quietest whisper of dialogue is reproduced beautifully and faithfully.
Spotlight: Majik House
Monitor Audio shines a spotlight on smart home technology experts Majik House, focusing on The Annexe, an immersive cinema Cinergy demonstration suite that utilises Monitor Audio's Cinergy speaker system, showing their clients what's achievable in a high-end home cinema.
Specification:
- THX Certification: THX Certified Ultra
- System Format: 3 Way
- Sensitivity (2.83 Vrms @ 1 M): 90 dB
- Maximum Linear SPL**** (@1m, free space): Continuous 109 dB, Peak 122 dB
- Power Handling (RMS): Continuous 350 W, Peak* 1400 W
- Nominal Impedance: 4 Ohms
- Minimum Impedance (20 Hz - 20 kHz): 3.8 Ohms
- Recommended Low Frequency Crossover Frequency: 80 - 100 Hz (High Pass)
- Recommended Amp Requirements (RMS): 200 - 1400 W (IA750-2 or IA750-4)
- Bass Alignment: Ported**
- Port Tuning Frequency: 47 Hz**
- LF Extension, In Wall, With Port Bungs (- 6dB): 47 Hz
- LF Extension, In Free Space, No Port Bungs (- 6dB): 47 Hz
- HF Extension (-6dB): >30 kHz
- Drive Unit Complement:
- 2 x 8" RDT Driver
- 2 x 2.5" C-CAM Driver
- 1 x MPD Transducer
- External Dimensions (Cabinet Only (H x W x D)): 904 x 300 x 160 mm (35 9/16 x 11 13/16 x 6 5/16")
- External Dimensions (Inc Grille) (H x W x D): 904 x 300 x 173.6 mm (35 9/16 x 11 13/16 x 6 13/16")
- Max External Dimensions (Inc all Fittings) (H x W x D): 904 x 300 x 173.6 mm (35 9/16 x 11 13/16 x 6 13/16")
- Weight: 30 kg (66 lb)
- Conditions:
- * Calculated from a peak voltage, this is not a true power figure but useful for comparisons.
- ** When used in an In-Wall or On-Wall configuration it is recommended to use the fitted port bungs to control bass output. This will effectively make the product a sealed box.
- *** Band limited with Low pass at 200 Hz, should only be used with IA800-2C and the correct speaker profile.
- **** Tested with a music like noise signal with distortion and power compression remaining below audible limits.
- THX:
- THX Certified Loudspeakers.
- THX and the THX® Logo are the property of THX® Ltd., registered in the U.S. and other countries.
- Warranty: Lifetime
